Difference between NSF and SSO (2024)

Table of Contents
SSO Operation NSF Operation FAQs

John,

SSO Operation

SSO establishes one of the supervisor engines as active while the other supervisor engine is designated as standby, and then SSO synchronizes information between them. A switchover from the active to the redundant supervisor engine occurs when the active supervisor engine fails, or is removed from the switch, or is manually shut down for maintenance. This type of switchover ensures that Layer 2 traffic is not interrupted.

In networking devices running SSO, both supervisor engines must be running the same configuration so that the redundant supervisor engine is always ready to assume control following a fault on the active supervisor engine. SSO switchover also preserves FIB and adjacency entries and can forward Layer 3 traffic after a switchover. Configuration information and data structures are synchronized from the active to the redundant supervisor engine at startup and whenever changes to the active supervisor engine configuration occur. Following an initial synchronization between the two supervisor engines, SSO maintains state information between them, including forwarding information.

During switchover, system control and routing protocol execution is transferred from the active supervisor engine to the redundant supervisor engine. The switch requires between 0 and 3 seconds to switchover from the active to the redundant supervisor engine.

NSF Operation

Cisco NSF always runs with SSO and provides redundancy for Layer 3 traffic. NSF works with SSO to minimize the amount of time that a network is unavailable to its users following a switchover. The main purpose of NSF is to continue forwarding IP packets following a supervisor engine switchover.

Cisco NSF is supported by the BGP, OSPF, EIGRP, and IS-IS protocols for routing and is supported by Cisco Express Forwarding (CEF) for forwarding. The routing protocols have been enhanced with NSF-capability and awareness, which means that routers running these protocols can detect a switchover and take the necessary actions to continue forwarding network traffic and to recover route information from the peer devices. The IS-IS protocol can be configured to use state information that has been synchronized between the active and the redundant supervisor engine to recover route information following a switchover instead of information received from peer devices.

A networking device is NSF-aware if it is running NSF-compatible software. A device is NSF-capable if it has been configured to support NSF; it will rebuild routing information from NSF-aware or NSF-capable neighbors.

Each protocol depends on CEF to continue forwarding packets during switchover while the routing protocols rebuild the Routing Information Base (RIB) tables. After the routing protocols have converged, CEF updates the FIB table and removes stale route entries. CEF then updates the modules with the new FIB information.

https://supportforums.cisco.com/docs/DOC-4028

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/nsfsso.html

http://www.networkers-online.com/blog/2008/11/cisco-and-nonstop-forwarding/

HTH

REgards

Inayath

*Plz rate if this info is helpfull.

Difference between NSF and SSO (2024)

FAQs

What is the difference between NSF and SSO? ›

NSF Operation

Cisco NSF always runs with SSO and provides redundancy for Layer 3 traffic. NSF works with SSO to minimize the amount of time that a network is unavailable to its users following a switchover. The main purpose of NSF is to continue forwarding IP packets following a supervisor engine switchover.

What is the difference between NSF and NSR? ›

NSF loads are light and therefore NSF does not degrade system performance. NSR loads are heavy and therefore NSR degrades system performance. System software exceptions can cause NSR failures.

What is SSO in VSS? ›

Short answer. SSO = Stateful switchover , establish a relation of active / passive between 2 supervisor engines in a chassis to provide uninterrupted L2 functionality in case of a hardware failure.

What is the difference between NSF Cisco and NSF IETF? ›

Because cisco Calls it Non Stop Forwarding, the command in both cases is nsf . nsf cisco is used to implement the Cisco version while nsf ietf is use for the IETF version. Both commands are available in IOS version 12.2(33)SXH and later. I hope this has been helpful!

Why is SSO preferred? ›

Security and compliance benefits of SSO

Every time a user logs in to a new application, it's an opportunity for hackers. SSO reduces the number of attack surfaces because users only log in once each day and only use one set of credentials. Reducing login to one set of credentials improves enterprise security.

What is the advantage of NSF? ›

A product with the NSF seal lets you know that the company complies with national safety standards and regulations and has undergone extensive testing.

How do you know if something is NSF? ›

The simplest way to learn whether the product you use is NSF-certified is to look for the NSF logo on the bottom of your food service item. There is also an official list available that lists all NSF-certified products on the NSF website.

Is NSF mandatory? ›

NSF certification is not required by law.

While certification is voluntary, some health inspectors require certified thermometers. Many businesses and organizations choose to use NSF-certified products because they want to demonstrate their commitment to food safety and to provide their customers with peace of mind.

Who needs NSF certification? ›

#1: Commercial Foodservice Products

This purview has expanded to refrigerators, pots, pans, and most other equipment you'd find in a kitchen. Being NSF-certified in this space is primarily a mark of sanitation. It's an assurance that: The product is disinfected of food borne pathogens.

What does SSO solve? ›

A single sign-on solution can simplify username and password management for both users and administrators. Users no longer have to keep track of different sets of credentials and can simply remember a single more complex password. SSO often enables users to just get access to their applications much faster.

What is NSF SSO? ›

Non-Stop Forwarding (NSF) and Stateful Switchover (SSO) are designed so a dual-Supervisor 6500 (or other device) can minimize packet loss during a Supervisor failure. They do this by keeping L2 and L3 state synchronized between the Supervisors.

How does the SSO work? ›

Whenever a user signs in to an SSO service, the service creates an authentication token that remembers that the user is verified. An authentication token is a piece of digital information stored either in the user's browser or within the SSO service's servers, like a temporary ID card issued to the user.

What is the difference between NSF and ANSI? ›

NSF is accredited by the American National Standards Institute (ANSI) to develop American National Standards and uses a ballot system similar to ANSI to revise and maintain those standards. Products that meet these requirements bear the NSF mark.

Is ETL and NSF the same? ›

It's important to note that unlike NSF, which sets their own safety standards through rigorous scientific research and technical testing, ETL does not create safety standards. Instead, they test products against the published standards of a list of NRTLs, including: ASME (American Society of Mechanical Engineers)

What is the NSF known as? ›

In that case, the stamp NSF means Non-Sufficient Funds. In other words, the check that the recipient tried to cash bounced due to less money being in the bank account than the amount for which the check was written.

What is the difference between SSO and non SSO login? ›

While SSO enables users to log in with a single, secure password, non-SSO means that a user is required to log into each individual account that they are using each time they want to access it.

Does NSF certified mean food grade? ›

NSF, National Sanitation Foundation, is a non-profit organization founded in 1944, whose goal was to create standards for food safety and sanitation to promote public health. When you purchase NSF certified foodservice products, it means: The manufacturer of food service products uses only FDA approved raw materials.

What does NSF approved mean? ›

A National Sanitation Foundation (NSF) certification is a certification that signifies a food product meets the public health and safety standards set by the NSF. It's a third-party nonprofit certification that applies to the appliances and products found in a commercial kitchen.

Is SSO better for security? ›

SSO is fundamentally more secure than not having SSO in place because it significantly improves an organisation's security posture in mitigating the risk of data breaches.

Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated:

Views: 5935

Rating: 4.7 / 5 (67 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.